|
|
|
|
|
#1
01-05-2011, 05:33 PM
|
|||||
|
|||||
I am using a Maxi Jet MJ1800 on my TLF 150 and it works perfect. I had 2 -150s being ran by this pump without issues. Carbon should not tumble at all it defeats the purpose. I am switching to a NextReef MR1 and hope this pump will work as well as it does on the 150.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build 
|
|
#3
01-05-2011, 06:31 PM
|
|||||
|
|||||
|
I was using a MJ1200, was working great, but wanted to cut down the number of pumps i had in the system, so I Tee'd off my return pump. My return is a dart gold, but i have low pressure since i'm dumping back to my sump for flow control. I had WAY more flow comming from my MJ1200. I don't think it's too little now, but more would be better, might go back.
As for people with issues of the tumbleing, make sure you get a mesh mod or sometihng for the reactor. the filter stuff that comes in there doesn't allow enough flow. With my MJ1200 i had too much flow and had to reduce it so the pellets would stop getting stuck in the top. You also need to clear out the stuck pellets every once in awhile, you should be getting LOTS of flow then.
__________________
My 150 In Wall Build
|
Hybrid Mode
