Bidirectional tidal flow

[golf nut]

Originally Posted by sphelps

Ok I'm still missing something here. It must be more than just a count down timer. If this were the case the drum would rotate until the sensor is triggered and opens a circuit. The open circuit triggers the counter which turns off the motor. OK so far so good but then when the counter stops the sensor is still in the same position and therefore the circuit is still open which will reset the timer. This will continue forever and the drum will never move again. For this system to work that timer must have some kind of algorithm built in, which will either be a delay or something that over rides the sensor until the circuit closes again.

For the system to be reliable a simple a delay won't work. If it's an over ride that's a pretty cool little system. How much would the whole system cost, built and ready to go?

It would be a fairly easy DIY mod to a 4 way or 2 way, still will cost $39

[MitchM]

Originally Posted by golf nut

It would be a fairly easy DIY mod to a 4 way or 2 way, still will cost $39

Does the 2-way come in a 2" size?

Monsieur Mitch

[golf nut]

It can do, I need to grab a body or two before they go to the next op and get them finished conventionally.

[MitchM]

I'll send you a pm.

[madkeenreefer]

Its working for me and I have not had any problems with the time/rotation getting out of sync. But hey whatever works

[MitchM]

Originally Posted by madkeenreefer

Its working for me and I have not had any problems with the time/rotation getting out of sync. But hey whatever works

What type of flow pattern are you running with yours?
How long have you had it running?

Thanks,
Mitch

[madkeenreefer]

Originally Posted by MitchM

What type of flow pattern are you running with yours?
How long have you had it running?

Thanks,
Mitch

1&3/2&4
3mths

[sphelps]

Originally Posted by golf nut

It would be a fairly easy DIY mod to a 4 way or 2 way, still will cost $39

So how does it work then? Is it a delay or an over ride? Do you have a link to the count down timer?

[golf nut]

Originally Posted by sphelps

So how does it work then? Is it a delay or an over ride? Do you have a link to the count down timer?

Try this one, I am golfing at the moment , will get more time later.


http://www.airotronics.com/site/cate...solidstate.php

[steve fedyk]

This is what I have been trying to come up with, for my new tank. the best I could come up with was two pumps on differant close loops. My thought was its drawning for the other side of the tank would give you the best flow.

How much flow should there be from side to side 5x , 10x ,or more. you don't wont to much flow or too little. Thats where the red dragon pumps would be nice but they're pricey.

I like the idea of the OM with the timer.