|
|
|
|
|
#1
12-31-2009, 04:23 PM
|
|||||
|
|||||
Quote:
__________________
Dan Pesonen Umm, a tank or 5 
|
|
#2
12-31-2009, 06:51 PM
|
|||||
|
|||||
|
K, want to report on things.
After 3 days (or 2 1/2), I am seeing more mulm from my ZeoReactor than prior. As I had an established 1.5L ZeoReactor, I already had bacteria colonization, so this probably sped up the process in the NP Bio Pellets. I am just guessing here. Anyways, after mixing the reactor just now, I can see much more mulm being pumped into my display prior to not having the NP Bio-Pellets. Prior to the Pellets I never saw anything, but now I actually see it coming out of my returns with a bunch of micro bubbles (from the pumping action I guess) I wasn't sure how good things would work, as I have the pellets in a carbon bag in the reactor, but all seems good. And when it is time to change the zeolites, I won't have to pick through things like Tony. HAHA! This is good, will keep watching things and see what happens. I haven't tested anything yet, will wait a few more days before doing this.
__________________
 Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk
|
|
#3
12-31-2009, 07:13 PM
|
|||||
|
|||||
|
So you didn't do any measurments before adding the pellets? Would be interesting to see if you get the same results as Tony.
Quote:
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms.
|
Hybrid Mode
