|
#1
|
||||
|
||||
Just remember that it's in your best interest to not run everything on that GFCI in case it trips...leave at least a powerhead or two off of it.
__________________
Mark... 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#2
|
|||||
|
|||||
Agreed! That's why I decided not to install the GFCI into the wall. This way I still have the wall receptacle to use for non-GFCI'ed (backup) stuff like you said. I am going to install a weatherbox over the non-GFCI wall receptacal as well.
|
#3
|
||||
|
||||
Hey Kien, where did you get your DJ-8 thing? Did you have to order it? Id like to get one.
|
#4
|
|||||
|
|||||
Sorry, I have no idea what a DJ-8 is but if you are referring to my GFCI thing-a-Ma-jig, all parts came from Rona.
|
#5
|
||||
|
||||
I meant one of these things as your power strip. I thought I saw one in your system, I could be wrong and havent looked back to verify:
http://askville.amazon.com/SimilarQu...eq=Power+strip |
#6
|
|||||
|
|||||
I think that power strip must be in someone elses build because it isn't in mine :-)
I will be using a Profilux digital 6 socket and 4 socket powerstrip once I get my Profilux controller up and running. Right now everything is just plugged into a regular powerbar. |
#7
|
||||
|
||||
Go
Last edited by Coleus; 04-30-2011 at 04:54 AM. |