Stockman overflows

[Doug]

Originally Posted by Phanman

I had the same problem with fitting the whole thing in at once (1.5 inch) due to the eurobracing. What i had to do was assemble it in the overflow chamber. Abit tricky to work with but was able to get er done..

With what type?

I had built a modified Duraso. I had cut the "T" and 90 elbow down to a minimum. It was designed to fit in the overflow chamber, which it would if I could get the darn thing past the eurobrace.

So its some type of straight pipe stack now.

I think I will go with the HGB, in the sizes Steve suggested.