|
|
|
|
|
#1
04-29-2009, 06:18 AM
|
|||||
|
|||||
the 2000 and 2000/1 are the same pump, the difference is the impeller and the max head height it can get to. the impeller got changed to a single piece impeller (impeller + shaft are 1 piece) while the old one (2000) are 2 seperate pieces. the AB2000 has a 1.6m head height and uses 18W i believe. the AB2000/1 has a 3.0m head height and uses 18W as well, i dont know what they changed for the head height increase.
The deltec PW version draws less watts too i believe around 12W instead of 18W which is a plus! 
|
|
#2
04-29-2009, 06:23 AM
|
|||||
|
|||||
|
Thats some pretty good horsepower outta the aquabee then, considering a 20W maxi-jet 1200 only does about 3.5ft (1.1 ish meters) head.
__________________
No more tanks  - Laying off the ReefCrack for awhile!Cheers, Chris
|
|
#4
04-29-2009, 04:38 PM
|
|||||
|
|||||
|
the aquabee will be bought from the deltec distributor in canada. I was contacting them regarding tunze replacement parts and a new impeller and shaft for my AB2000 when i decided, why not just get a new one. I dont know if that is the cause of the slight popping noise (as i cant see any ware on the AB2000 impeller), but i thought it would give it a try until i just decided to buy a new one. none the less the pump still performs great for my MCE600 even with the slight pop so i dont know whats causing it.
Still available, if anyone is interested the pump will be available after i recieve my AB2000/1 Last edited by imisky; 04-29-2009 at 04:41 PM.
|
|
#5
04-29-2009, 06:57 PM
|
|||||
|
|||||
|
open up the pump where is the impeller out put is there should be a swing door i bet it is that rotating around....
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. Last edited by Skimmerking; 04-29-2009 at 09:58 PM.
|
Hybrid Mode
