|
|
|
|
|
#1
01-01-2009, 06:05 PM
|
||||
|
||||
Stircrazy, I throughput my video from my blueray via HDMI to the tv. The tv has the volume turned off. The audio goes from the bluray to the receiver.
Not as elegant as it could be, but the sound is adequate untill I buy a new receiver. 
|
|
#2
01-01-2009, 06:46 PM
|
|||||
|
|||||
|
midgetwaiter - same data goes down the pipe from the player, the processing is done in the TV.
Hillecom (Stircrazy) - that's what I'm doing as my receiver doesn't have HDMI inputs. A HDMI interconnect between the Blu-ray player and TV to keep the video signal digital then the coax audio from the player the the receiver, with the TV volume off. Only thing I'm missing is the lossless audio. Last edited by mark; 01-01-2009 at 06:48 PM.
|
|
#3
01-01-2009, 07:15 PM
|
||||
|
||||
|
Quote:
True 1080p at 120hz is 4.445 Gbps. That's a lot of data
|
|
#4
01-01-2009, 07:22 PM
|
|||||
|
|||||
|
I've dumbed it down A LOT here but...
True Hi Def (full resolution HDTV) gives a picture format of 1920 x 1080 at 24 frames per second. That is the source we create (I work in the film & TV industry) that goes onto Blu Ray disks & also give to the broadcasters to transmit to your homes (for those of you that have HD satellite or cable). You need a 1080p capable display to properly to render this in it's entirety. If you don't then your TV will be downsizing the signal to 1080i, 720p, 720i etc. Doesn't matter if you're using a 120Hz or a 60Hz display, the data going through the cable is still 1920x1080 @ 24 frames per second. The cables we use at work are built by our tech guys & are good basic shielded cables with very good quality connectors. Our cable runs are huge & can have dozens of cables bundled together, running 20m away from the source. There's no signal degradation issues. Until we start pushing more data down the line (1080p@50 or 60 is in the works) & unless you have a long cable run, there's no need to spend big $$$'s on cables. Just my personal experience. .
|
Hybrid Mode
