Super Skimmer Rocks!

[Aquattro]

pics fixed....kinda

[raquel]

Nice set up. Your pump looks like it is too far below the water level. Try raising it up to just below.

Raquel

[outtafocus]

Hey Raquel, how deep is your pump? I went with what the manual says, about 8inches below the water level.
I really want to let this skimmer run but I am just to affraid to.
Any new tips on set up or mods?

[outtafocus]

[img]

[/img]

[Salinity Now]

Thanks Muck and reef_raf for the heads up and help on the photo upload.

raquel, I purchased the 65gal version at J&L's.

http://www.jlaquatics.com/phpstore/s...ct_ID=ps-c3000

Nice set up. Your pump looks like it is too far below the water level. Try raising it up to just below.

Raquel

Yes, it's totally too low. I just don't want to cut that wonderful black hose that comes with it, ha, ha, ha. I keep going to Rona to pick up stuff, ya think that I'd remember to pick up some 5/8" I.D hose? I am also planning to place it into a sump when I set up my 65gal tank, so that length will work perfectly for that application.

Anyways, it's totally working fine for me right now. It did however take a while to adjust to the low pump height.

[Salinity Now]

Did yours come with the following valve?

I was told by J&L that Coralife started providing it because people were complaining that the pump was too powerful.

I will not be using "the valve". ha, ha, ha

[outtafocus]

That valve comes with the pump. If you were to buy a Rio pump I believe it comes in the box. Since Coralife probably gets them with the pump they just throw it in. That what I think any way.

Im not going to use it, but I have if I need it.

[raquel]

Hi All, I didnt get that valve. The pump isnt too powerful so I wont miss it.

Yes, definitely raise your pump to within 2 inches of the surface. Protein Skimmers work better when the pumps are close to the surface.

Masked Reefer - You got a steal at $114. J & L's wins again! The 65 gal version was $149 at King Eds. I also overpaid for high compact florescent bulbs at King Eds, so I am starting to get miffed

Oh well, live and learn.

Raq

[outtafocus]

I dont think I can move the pump up any more. The big stupid bubble trap is in the way. I could go up about 1 inch. I will also be putting mine in a sump pretty soon, so for now I will leave as is.
If the skimmer works best with the pump up high, why does the manual say to put the pump on the bottom in a sump?

[raquel]

I am not sure about sumps but I assume that the water level isnt too high in them anyway, but I think the water is drained from the top before it goes to the sump. Anyone else have ideas about this.