Anyone else noticing dashboard chart problems on ApexFusion after updating firmware?

[Delphinus]

Well, annoying as it is, I'm actually a bit relieved if it's a bad firmware issue.

It was actually my first update on my newer unit (the old one had a hardware failure and I had to send it in for repair and it was gone 2-3 weeks). I'm always leery of firmware updates for exactly this reason (this really doesn't help me change my view on that, haha). As it turns out I had to do some shuffling of outlet assignments (my heater was killing the UPS) and do some programming to the skimmer feed pump to prevent it from filling the skimmate locker after a restart) so I figured it was about as good as a time to do this as it ever gets.

But it is a relief to hear it's firmware over hardware. That means it should eventually be fixed, a hardware issue scares me worse since that has the capacity to wipe out a tank (sadly known from experience, which nearly ended me forever in the hobby honestly).

[Delphinus]

So this might not be firmware after all.

It looks like my issue is that my clock isn't correctly updating to the correct time. I didn't notice this because Fusion was showing me PC time not Apex time so the time looked correct. But the clock on the LED display was way off.

So hopefully this fixes things for now, I guess I'll know tomorrow if the charts are updating then. The clock timesync is an issue then of course, but at least manually setting the clock is an option for the meantime.

Also weird that the dashboard time is PC time. Same as on the local network access too. Odd.