O.C.'s Pellet questions and answers!

[OceanicCorals-Ian-]

Originally Posted by kien

I ran mine for 3 months out of sump without gluing and didn't have so much as a drop if water from it.

Yikes! I would worry about the fittings separating.....!!!

[kien]

I wonder if some are made different because mine was really tight. I mean once I shoved it in there I needed pliers to get it out, I kid you not!

[OceanicCorals-Ian-]

Originally Posted by kien

I wonder if some are made different because mine was really tight. I mean once I shoved it in there I needed pliers to get it out, I kid you not!

Oh!! Not a chance for some of the ones I have put together including mine! You could tilt the Reactor and the fitting would fall to the floor....

[burrows14]

Originally Posted by OceanicCorals-Ian-

If you can't find anything I have some hose that will work if you don't mind driving into Langley to pick it up.....

Thanks Ian, I'll let you know if I cant find anything

[kien]

Originally Posted by OceanicCorals-Ian-

Oh!! Not a chance for some of the ones I have put together including mine! You could tilt the Reactor and the fitting would fall to the floor....

Oh geez! I must have gotten the 1 in a million with a manufacturing defect

[OceanicCorals-Ian-]

Originally Posted by kien

Oh geez! I must have gotten the 1 in a million with a manufacturing defect

[Finley]

Guys,
Once bio pellets are being run is there a need to still run my carbon and phos in my TLF cannisters?

[OceanicCorals-Eugene-]

Originally Posted by Finley

Guys,
Once bio pellets are being run is there a need to still run my carbon and phos in my TLF cannisters?

Its always good to have carbon running as the bio pellets and carbon remove different things. As for phosphate removers, its not necessary to run them, and i would actually recommend stopping the phos remover as it limits the PO4 levels that the pellets need in order to work properly.

[Cameron]

Here is my TLF150 Phosban reactor, with MJ1200, and the New NP Pellets:

http://www.youtube.com/watch?v=MbuPRkYg-FA

UPDATED

[OceanicCorals-Ian-]

Originally Posted by Cameron

Here is my TLF150 Phosban reactor, with MJ1200, and the New NP Pellets:

http://www.youtube.com/watch?v=j9TQKnxL2ws

Can't see your video for some reason, it says private video...??