|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
02-15-2016, 05:24 PM
|
||||
|
||||
Built the sump stand 18" high, plus sump should give me a good working height. There is room for storage underneath. Sump is 54"X20"X18" with 4 compartments. Drain/sock section, skimmer section, return section and refugium with blacked out glass.
Last edited by WarDog; 03-06-2016 at 07:53 PM. 
|
|
#2
03-06-2016, 07:07 PM
|
||||
|
||||
|
Work on electrical is done.
 Plugs are set on there own 20amp breaker. Plugs are GFI. I have 4 near water storage and Ato area, and 6 near main control board for sump/aquarium use all in the sump room. Wires are protected by pvc conduit. Also working on the plumbing.Last edited by Slykat; 03-06-2016 at 07:12 PM.
|
|
#4
03-15-2016, 10:25 PM
|
||||
|
||||
|
Here is an update of the water storage/mixing plumbing.
http://www.canreef.com/vbulletin/alb...pictureid=7181
|
|
#5
03-15-2016, 10:44 PM
|
||||
|
||||
|
Its a 40g Vertical tank with vented lid and bottom plumbed bulkhead.
http://www.canreef.com/vbulletin/pic...pictureid=7182 Ro/Di water is plumbed to upper part of tank, with a float valve for redundancy. http://www.canreef.com/vbulletin/pic...pictureid=7183
|
|
| Tags |
| 180 gal tank, new tank |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
