Utterly frustrated with Tunze streams..

[Reefer Rob]

The RW15s sound like they're playing a bad song running with jebao controlers. Controlling with my profilux now, but they keep stopping for no reason. If I unplug the network cable from the adapter and plug it back in they start up again. It's difficult to troubleshoot. Lots of flow through.

[jorjef]

I have had The WP-25 and now a pair or RW-8 and never an issue with either

[Aquattro]

Originally Posted by Reefer Rob

The RW15s sound like they're playing a bad song running with jebao controlers. Controlling with my profilux now, but they keep stopping for no reason. If I unplug the network cable from the adapter and plug it back in they start up again. It's difficult to troubleshoot. Lots of flow through.

I never used mine with the controllers, but ramping from 40 to 85% now via Apex, dead silent.

[Myka]

Don't forget to order a 3rd Jebao so you can replace a dead Jebao around the 1 year mark. But they are cheap, so replacing once a year is no biggie!

[Aquattro]

Originally Posted by Myka

Don't forget to order a 3rd Jebao so you can replace a dead Jebao around the 1 year mark. But they are cheap, so replacing once a year is no biggie!

Exactly. I have a spare. But good PSA.

[smokinreefer]

Hey guys, I have an old tunze I am not using because the mount broke. When I find it, I'll post it up and see if is something you guys can use.

[smokinreefer]

Found my old thread. It's a 6080

http://www.canreef.com/vbulletin/sho...ighlight=Tunze

[Reefer Rob]

Originally Posted by Aquattro

I never used mine with the controllers, but ramping from 40 to 85% now via Apex, dead silent.

I have one noisy on and one quiet one, so I've set one to 80% and one to 100% with the Profilux.

Does Apex do 0-5v or 0-10v? I tried setting the Profilux output to 0-5v as suggested, and they only ramped up about 1/2 way... but very quiet.

Got home today and both the pumps had stopped again. Grrrrr

[Aquattro]

Originally Posted by Reefer Rob

Does Apex do 0-5v or 0-10v? I tried setting the Profilux output to 0-5v as suggested, and they only ramped up about 1/2 way... but very quiet.

Sorry, honestly don't know. 0-10 sounds right, but I often make stuff up in my head

[Reefer Rob]

Just measured the output from the Jebao controller, it's 5v max.

Now the weird part. With the Profilux set to 0-10v I get 4.89v at the control circuit out to the pump. There must be a resistor in the adapter for the Profilux circuit.

Temped to just hook them up to an old wave maker power bar.