![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
#20
|
|||||
|
|||||
![]() So I have been hitting my head all throughout the day to see whether or not I should get a controller for my tank. Here are my thoughts:
Apex: Too darn expensive for my taste and for what I will get. A jr costs $305 with which I will need to add another $127 for VDM to be able to control the kessil. Alongside, I will have to buy an ATO separately ($130). So, for light control, temperature control and ATO, I am in $562. Reefkeeper lite: A basic unit will cost me $170 and the LED control unit will be $100. The ATO switch will cost me $50 and the expansion unit to connect the ATO will cost $120. So all in, its $440. Reefangel: This is probably the only controller that includes all the units that I need (ATO, 1-10v dimming, 8 outlets, etc.) but with the crazy conversion rate right now, the total is coming out to $550. Still a deal when considering Apex but this is too much. For me, there are two main reasons for looking into a controller: 1. Heater control (the MOST important reason) 2. LED control (a luxury I don't need but why not!) So I have decided to go to a very elementary approach. Here are the equipment that I will have and how they will be controlled: 1. Skimmer: it is going to be on 24-7 so I will have this connected to an outlet 24-7. 2. Pump in the return compartment: it is going to be on 24-7 too so direct connection to an outlet 24-7. 3. Wavemaker: RW-04 will be connected through a timer outlet; I don't want to rely on the night mode sensor. 4. ATO: I will be getting tunzi nano. Will be around $130 and includes pump. Thought about getting hydor but the 1cm difference between the two probes might not be great for such a small tank. The ATO will be connected to power outlet directly and for 24-7 5. Light: I will get a spectra controller ($130) for the kessil. 6. Heater: Will get a jager 50W and connect it to Jonson Tempeature controller. This is an industrial controller and not hobby grade so much more reliable. And cheap. Around $70. So with the required controls, I am spending $330. Not getting all the fancy stuffs but I am also leaving more money in my pocket ![]()
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
Thread Tools | |
Display Modes | |
|
|