|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-19-2015, 07:27 PM
|
|||||
|
|||||
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD  TOTM Fall 2013 
|
|
#2
03-19-2015, 09:09 PM
|
|||||
|
|||||
|
I think the majority of reactors run half inch ID. Everything is looking good so far!!
|
|
#3
03-21-2015, 07:13 PM
|
||||
|
||||
|
Return Plumbing
busy day today
 I got all my returned plumbed. 2 ball valves on oposite ends to control flow to each nano. The one in the middle for the reactor. Then added aone lower for Water Changes (dump water) Let me know what you think? I'm working on the drains now! Pic to come. System might see water tomorrow
|
|
#5
03-21-2015, 10:07 PM
|
|||||
|
|||||
|
No unions on your drain for cleaning?
|
|
#7
03-21-2015, 10:54 PM
|
|||||
|
|||||
|
What you've done is by no means wrong, just a personal preference.
If it were me, I would have each flex going into a union, one above the elbow on the right, and one above the branch of the tee. This allows you to completely remove the drain rail for servicing and/or removal the sump. Like I said, it's a personal preference.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
