GHL Doser 2 APP's and more

[Scythanith]

"There are no technical knowledge required..." Actual quote from GHL's german support forum.

This is what I could translate trying to help. As you can see, no technical knowledge required...



There are no technical knowledge required , however , terms such as static IP address, default gateway, etc. to be known

To change the wireless settings , the current GHL Control Center is required .

Embed GHL Doser 2 Wi-Fi into their own network

Connect . Via USB to the GHL Doser 2 and select the System menu option
Then select Wi-Fi from the Mode.
Then select the client mode to allow the GHL Doser 2 can connect to the local network.
Now the GHL Doser 2 has a fixed IP address should be assigned to select the item and enter the following settings to use the IP address ( Static IP provider: http : //www.drwindows.de/windows-anle ... -netzwerk.html ) , subnet mask, and default gateway. ( Default gateway / subnet mask to find out : http://www.windowspower.de/router-he...8-1_15333.html )
(Alternatively, you can automatically obtain the address, you must then determine what address from the access point to the GHL Doser was awarded 2 ).
Next, enter the SSID of your access point (router). (SSID find out: http://praxistipps.chip.de/eigene-ss...so-gehts_28856 )
Then select the encryption and the encryption type , you will find it as the SSID in the user interface of your access point (On the Fritz box is AES = CCMP) .
Finally , enter the wireless key , these can be found mostly on the back or in the user interface of the access point .


After you have set all the GHL Doser 2 needs a few minutes to connect to the network.
If it does not work right away, Start the GHL Doser 2 new (disconnect from current).

To be able to connect to the smartphone app , enter the previously set IP address in the app.


Embed GHL Doser 2 via LAN to own network Embed GHL Doser 2 via LAN to own network
Click on the image for larger view

Name: Doser_LAN.png
Hits : 6
Size: 77.8 KB
ID : 6753

Connect . Via USB to the GHL Doser 2 and select the System menu option
Then choose LAN from the Mode.
Now the GHL Doser 2 has a fixed IP address should be assigned to select the item and enter the following settings to use the IP address ( Static IP provider: http : //www.drwindows.de/windows-anle ... -netzwerk.html ) , subnet mask, and default gateway. ( Default gateway / subnet mask to find out : http://www.windowspower.de/router-he...8-1_15333.html )
(Alternatively, you can automatically obtain the address, you must then determine what address from the access point to the GHL Doser was awarded 2 ).


After you have set all the GHL Doser 2 needs a few minutes to connect to the network.
If it does not work right away, Start the GHL Doser 2 new (disconnect from current).

To be able to connect to the smartphone app , enter the previously set IP address in the app.


Direct wireless connection with the GHL Doser 2

Click on the image for larger view

Name: Doser_WLAN_AccesPointModus.png
Hits : 8
Size: 81.9 KB
ID : 6754

Connect . Via USB to the GHL Doser 2 and select the System menu option
Then select Wi-Fi from the Mode.
Then select the access point mode , so you can connect directly to the doser .
Next, you can choose whether to hide the GHL Doser 2 should be visible to other devices or not.
Then select the encryption and the encryption type , recommended is WPA2PSK and AES.
Then , enter the wireless key , this you can choose freely.
Finally, select the wireless mode and channel to recommend would 11b / g / h and mixed channel to Auto.


After you have set all the GHL Doser needs to store 2 a few minutes to the settings.
If it does not work right away, Start the GHL Doser 2 new (disconnect from current).

To be able to connect to the smartphone app , you need to connect via wireless LAN directly to the doser .
To do this open the wireless settings of the smartphone / tablet , connect to the network GHL- DOSER2 and enter the preset key .
The app then enter the IP address 10.10.100.254 .