noob just beginning questions

[WarDog]

Welcome to Canreef! I'm not sure where you are getting your information from, but in my honest opinion I wouldn't put water in a tank without a skimmer. No real order in which you need equipment either. Keep an eye on the buy/sell forum and check out other members tank builds. Lots of useful info there!

[Slyguy00]

Originally Posted by WarDog

Welcome to Canreef! I'm not sure where you are getting your information from, but in my honest opinion I wouldn't put water in a tank without a skimmer. No real order in which you need equipment either. Keep an eye on the buy/sell forum and check out other members tank builds. Lots of useful info there!

I ran my tank skimmerless and sumpless for almost a year. Not necessarily the best way to do it, but it works just fine. The sooner you get a skimmer the better though. They certainly make a big difference.

[SaltyDog143]

If memory serves me correct...and some times it doesnt, was suggested in some reading that it isnt necessary to have skimmer until after the tank cycles and your rock is all upnd properly seeded, or however you want to refer to it

the reason I ask about the order to buy is because I cant exactly go buy my rock and sand before i get the filters, lights, etc I need all this other stuff in place first, it will be a slow process for us, going to start with the basics and work our way up, our hope it to have a fully function beginners reef tank by spring.

I just need to figure out things like how big the pumps need to be, how big the skimmer needs to be, what lights we need, etc

thanks again
Randy

[pinkreef]

Make sure your tank is level, add rock water and sand(if you want sand).
mixing the water in the tank before you add anything else is one way of doing it. Add a heater and powerhead. get a skimmer rated for 100gallon at lease and get it going.
now you can watch your tank come to life
oops you need a light to be able to watch it
enjoy

[ronau]

I'd buy some Rubbermaid brutes and start curing your rock now while you are collecting your equipment. It'll speed up the cycle time once you have your equipment.

[SaltyDog143]

Thanks for the input guys,
on the rubbermaid idea....could we potentially leave the rock in there for a month or so while we were getting everything else together? I am thinking the lighting is going to be the biggest hurdle as thats a big investment.

[Slyguy00]

yea you can leave it in the rubber maids as long as you have flow in the water and temperature control.

[SaltyDog143]

Ok so I am gonna surmise here.......

Get a stand and sump,
next pumps and heaters
then go buy rock put it in the tank, fill it with RO water start circulating and bring up to temp
Install internal fans, current makers, whatever you call them to get water flow

bam, we have started

next get lights on the tank, then a skimmer and watch your tank start to evolve, slowly.......

am I starting to get the idea straight?
or am i still out to lunch

oh ya dont forget the salt, lol

Randy