|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#2
08-31-2004, 02:01 PM
|
|||||
|
|||||
I run a 250 10k bulb on just a regular old magnetic ballast.Usually flashes up in about 10 seconds.If the bulb is running for awhile and I have to unplug,it has to cool down(the ballast)before it'll start again.
__________________
______________________ Jim 
|
|
#3
08-31-2004, 03:54 PM
|
|||||
|
|||||
|
I was running an Aqualine 10000K 175W bulb on a M57, cap and coil ballast. It used to take three tries over a period of more than half an hour to light. Then one day I came home and the light was not on. As you might guess I am now waiting for a new ballast to arrive.
__________________
Bob ----------------------------------------------------- To be loved you have to be nice to people every day - To be hated you don't have to do squat. ---------Homer Simpson--------
|
|
#4
08-31-2004, 06:57 PM
|
|||||
|
|||||
|
if your talking about from the time it fires till it is at full power and temp I would say about 1 minuit. mine are real green for about 30 seconds.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#5
08-31-2004, 11:48 PM
|
|||||
|
|||||
|
What would cause a bulb not to fire up? I hooked two 175w bulbs to two M57 ballasts... sometimes when I plug them in, they fire up, sometimes they light up for a little bit, then shut off. Did I wire them incorrectly?
-Richer
|
|
#6
08-31-2004, 11:58 PM
|
|||||
|
|||||
|
A thought occurs... I had the ballast and cap sitting on a piece of aluminum (a sheet, not the foil). Now that I've taken the ballasts and cap off of the sheet, it works. Guess I won't be putting these things on the aluminum
 -Richer
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
