Crack in my sump.....

[Coralgurl]

Well I'm going to chat with Dave about a new sump while I'm there. I like mine, its simple, so may just redo it without the ato reservoir, keep it separate.

Will be nice to not have a constantly disorganized fish room of clutter, close in the stand.

But with school starting and Xmas around the corner, may be a slow process. But at least it's better than shutting down!

[Coralgurl]

Well we have siliconed in the new piece of glass and I let it sit for 24 hours, even though I used a product that can be applied directly in the water. I filled my ATO this morning approx. 1/2 and this will hopefully be the fix! Problem now is the second piece of glass is acting like a mirror and I can't see through it with the water, so I'll have to the let the ATO run low every once in a while to monitor.

Thank you for all the help and suggestions. I'm still going to look into a new sump for the basement eventually, but if this works, then will keep things as is.

[Skimmerking]

i would have scored the crack so it would move. If any score it to continue to crack toward the bottom if that makes sense./

[Coralgurl]

Will look into that, its still possible to do, thanks. Its frustrating as I am not sure how long the crack was there, but since finding it, it hasn't moved at all.

[Werbo]

Seems like alot of work for something that should just be replace. Especially if you live in Calgary and can go to Concepts for a new sump

It may not have moved YET but the crack will move as is the nature of glass.

I'd just start thinking of the features you want in your "dream sump" and get that off to Dave/Denny ASAP.

[Coralgurl]

Originally Posted by Werbo

Seems like alot of work for something that should just be replace. Especially if you live in Calgary and can go to Concepts for a new sump

It may not have moved YET but the crack will move as is the nature of glass.

I'd just start thinking of the features you want in your "dream sump" and get that off to Dave/Denny ASAP.

More work and moola to redo the sump and plumbing I will work with Denny and Dave as soon as they are settled with their build out! That said, it was Dave who said the fix we did should work and the crack shouldn't spread, he provided a nice thick piece of glass to use....

I just realized I didn't give a shout out to Dave for his help, THANKS DAVE!!!

[Coralgurl]

So far everything seems to be good with the fix. But....last night my skimmer went beserk! It was overflowing and gurggling.....I unplugged it, but is this caused by the new silicone? It had been fine all day, got home was still normal, then went to check the tank around 7 pm and it was nuts.....the ato was down approx 3 gl.

I'm guessing the skimmer is just going to have to run its course for a bit? I didn't turn it back on yet.