![]() |
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
I haven't had heaters in my tank since I first set it up last may. I have glass covers on the top to keep humidity down. The tank drops to 79 degrees at night and with the halides on the tank reaches 82
|
|
#2
|
||||
|
||||
|
as far as saving energy ditching the sump would be the way to go!!, I changed sumps earlier this year so my tank was running for a couple hours sumpless, with only 1 heater ( I have one in the sump) my temp stayed steadier than it has ever been, so thats 480 watts of electricity there... 28 dollars a month to run my sump...
|
|
#3
|
|||||
|
|||||
|
Well it obviously depends what you use but for example I basically run four Tunze 6105s. If I just ran these full power all the time it would be 35W x 4 x 24 = 3.36 kWh per day. If I alternated flow it would cut it down by half and then if I also just reduced flow to 20% or so at night the savings would be even better at approximately 35W x 0.5 x 4 x 12 + 35W x 0.2 x 4 x 12 = 1.176 kWh per day. Savings of 2.184 kWh per day. This will add up to power savings and while yes not substantial if combined with a few other "miniscule" ideas it could add all add up to something substantial.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|