It's too loud !!!

[maron6977]

The durso's are a kit that comes with the tank - I think . I bought it used but saw the exact same thing as a complete setup at lfs.
Are there different ways to do the durso's???

[Mike-fish]

This is one of the two for my 175g that I shut down after Xmas plead excuse the fact that its far from clean. here is a link to the web site http://www.dursostandpipes.com/ I've ran them on all my tanks and love them dead silent too. Also at the filter socks try to minimize that open air drop as it makes a bunch of noise.

[maron6977]

Ya , that's what mine look like . I've inserted small pieces of PVC pipe in bottom side of bulkheads in filter socks to minimize water noise into sock .
I think I'd be happy if I can eliminate noise thru hoses .
I'll try new hose & maybe throw some ball valves in to try .

[maron6977]

So is your water noise dead quiet from overflow to sump ?
Did you install ball valves to control flow ?

[Mike-fish]

On that tank I didn't have ball valves on the drains but on the new 270g I have valves but they always remain wide open I just have them there as a insurance policy. There is no noise throughout the system all I hear is the skimmer and pumps. My over flows are combined capable of 4000+ gph. Almost double my return pumps so I have a huge safety net.

[monocus]

switch your dursos for stockmans .they take up less room easier to clean and get rid of the corrugated for a smooth drain.i wouldnt bother with ball valves on the drain and try to flow the drains as direct to the sump as possable

[maron6977]

Well , I've spent all day driving around getting wrong fittings , fittings that didn't work & spending money I don't have ! Finally I got all the fittings & re-plumbed so it all fit & looked pretty . I start it up & it's the same thing if not noisier . So I cracked a beer & relaxed for a bit so I didn't kill someone ! Then I thought, I didn't try the kiss method (keep it simple stupid). So took all the prettiness I just created off & started again .
There are 1 1/4" barbs off the durso, so I attached 1 1/4" smooth hose & ran it right into the socks . Started it up & it's a little quieter then when I started but not silent !!!
Maybe I'm asking for too much or am I missing something ???
Still it just sounds like water trickling thru the hoses & maybe durso .