![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() $100
|
#2
|
||||
|
||||
![]() Don't think you will find a decent one for that...unless it is used, maybe.
|
#3
|
||||
|
||||
![]() here what do u think about this one ?
|
#4
|
||||
|
||||
![]() I have a Bubble Magus NAC5e and do not recommend it.
|
#5
|
||||
|
||||
![]() Care to elaborate please? I've looked at that model before and thought I might want it.
Thanks |
#6
|
||||
|
||||
![]() i found this protein skimmer really cheap on ebay
http://www.ebay.ca/itm/150-gal-Aquar...ht_2376wt_1271 |
#7
|
||||
|
||||
![]() Looks like the whole thing sits INside the aquar.
|
#8
|
||||
|
||||
![]() Quote:
2. Need ato to keep the level right inside the skimmer. Need to always adjust the valve to get dry skimmer cause as the level drops, you get wet skim and possible flood. Flooded my house twice this way. 3. Prone to flooding the house when first starting up. You need to close then open the air valve at the right moment to get the suction going. 4. Can not clean properly due to design. Only way is by vinegar bath which doesn't get the plumbing properly clean. 5. Does not skim well and produces large bubbles. 6. If the impeller gets cleaned, you need to adjust the pump house 5 or 6 times prior to it starting properly. 7. Produces tons of microbubbles regardless of how broken in it is. The sponge helps somewhat. 8. Cheap parts and design. Sections broke while cleaning. 9. Never buy another chinese skimmer again. Next time it's german for sure. 10. Jay Leno asks Michael Jordan if he can still dunk now that he is retired. Jordan says "What are you stupid?". |
#9
|
||||
|
||||
![]() i would reccomend a JNS VS1 skimmer. Not so cheap... well not $100 dollars cheap. But very good skimmer.
if you want a cheap hang on skimmer i will sell you my used coralife hang on skimmer for $75 + $15 for shipping it is rated for 125 gallons to ![]()
__________________
Nick Last edited by nrosdal; 01-15-2013 at 08:09 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|