URGENT PLEASE HELP ! Shock everytime I put my hand in the tank

[mtlreeffreak]

Originally Posted by gregzz4

Getting shocked only sometimes could mean the faulty hardware is something that only runs sometimes, such as a heater


Something else I wanted to touch on, but after the multimeter stuff ...

You have a ground probe and are getting shocked.
Does this mean you don't have a GFCI ?

Using a probe without one is much more dangerous than not using a probe at all. You are allowing the water to become fully energized (completed circuit) from a voltage leak but doing nothing to protect yourself

If you are using a GFCI, test it

no GFCI here..

[gregzz4]

Originally Posted by mtlreeffreak

no GFCI here..

Umm, that's a pretty dangerous situation
Let's just say it's a good thing you only got shocked
For the sake of your critters, I'd suggest you unplug the ground probe for now and DON'T TOUCH the water
This will cut down on the amount of current in the tank and give them a break
DO NOT touch the water without the probe in place as you will become the ground

Maybe spend tonight reading up on aquariums with GFCIs and ground probes

1 - Plug the probe back in when you have the meter ready to go
2 - Find the hardware issue and fix it
3 - Install a GFCI, or a bunch of individual ones for each 'wet' hardware piece