Losing Corals fast...question about GE Silicone II

[Aquattro]

Doug, I don't think that's the moral of the story here at all. I'm pretty sure All Glass doesn't make silicone, it's just re-branded, and I wouldn't be surprised if it came out of GE. It's like buying Two Little Fishies seaweed (with the little dotted cut your sushi roll here lines) vs. grocery store nori. One is simply packaged for the hobby at a good profit for the repackager. The same with silicone.

[fishytime]

Originally Posted by Aquattro

Doug, I don't think that's the moral of the story here at all. I'm pretty sure All Glass doesn't make silicone, it's just re-branded, and I wouldn't be surprised if it came out of GE. It's like buying Two Little Fishies seaweed (with the little dotted cut your sushi roll here lines) vs. grocery store nori. One is simply packaged for the hobby at a good profit for the repackager. The same with silicone.

I realize this, but at least being branded as aquarium safe will give the consumer some sort of leg to stand on if there are any issues.....

[Mandosh]

Both GE I and GE II have "kitchen & bath" (mildew inhibitors) and "window & door." The issue with GEII, from my understanding, is the fact that it is considered "neutral cure." It doesn't realease acids as it cures (so it doesn't stink like vinegar) and because of this it can leach substances (ammonia?) into the tank water for the first couple weeks.

[Carrera75]

Originally Posted by Aquattro

I used GE II on my tank and have had no issues at all. I did let it cure longer, but 48 hours should be more than enough time to seal it chemically.

Originally Posted by Aquattro

However, this was over a year ago, so if the formula changed, you might be affected by it. Last year your buddy was right, GE II "was" reef safe...

I got an email from GE and they said that it's not safe. Here is what Matthew Brown from GE had to say and I hope this helps other reefers to choose their silicone wisely in the future.

"Daniel,

Thanks for your email and I am sorry to hear about what happened. The Silicone II has a mold and mildew inhibitator in it and will never go away. Unfortunately, as long as the silicone II is in the tank, you run the risk of it killing the reef, etc. We would recommend removing all of the silicone to keep from that happening.

Matthew Brown
Customer Service Rep.
P - 877.943.7325
F - 304.746.1654"

Originally Posted by asmodeus

Wow man I'm so sorry to hear about this. Your tank was so flourishing with life

The new one was 1000 times better than the Solana.

Originally Posted by Seamazter

Do like 5% water changes every 2 days, and use alot of carbon.
This is a sad thing to see happen, if you cannot move your corals out of the tank try the advise above.

I have been doing 20% water changes every 12 hours and I am also running Purigen, ROWAphos and Kent Carbon.

Originally Posted by Lonster

I just used GE II about a month ago to build my new sump. I read there was issues when it was not left to cure long enough, I left mine for about 5 days until it didn't give off a smell anymore and have had no problems with it. There are two different types, one with mildew inhibitor and one without, I was told to make sure that I used the one without. Are you sure you used the one without the mildew inhibitors?

I guess you got lucky. I am glad that you didn't have any issues as I don't wish this to anybody.

Originally Posted by Mandosh

Both GE I and GE II have "kitchen & bath" (mildew inhibitors) and "window & door." The issue with GEII, from my understanding, is the fact that it is considered "neutral cure." It doesn't realease acids as it cures (so it doesn't stink like vinegar) and because of this it can leach substances (ammonia?) into the tank water for the first couple weeks.

I found this the hard way. Ammonia has been an issue since day one but it seems to be under control now. The plan is to take everything out to remove the silicone. I don't think I can do a few weeks of this, one week has been enough. I makes so sad to see corals that have been with me for several years slowly dying.

[Carrera75]

Originally Posted by fishytime

Really sorry to hear about your losses.....I guess the moral of the story is.... Don't cheap out..... It's amazing to me how many folks look for cheap alternatives for things in this hobby..... Only silicone I've ever used is All Glass aquarium silicone..... Way more expensive than GE or any other brand, but at least I KNOW that it is aquarium safe...... GEs products are not formulated with the aquarium hobby in mind and small changes in formulation can obviously have a big effect..... Again sorry for your issues

Please think a bit more before posting. Do you really think that I would risk my corals in order to save a few bucks? I have invested so much money and time into my set up that saving a few bucks was not the reason to use GE Silicone II.

Money was never an issue. Let me tell you that I set up a whole new tank and spent lots of money just so I could give more room to my Elegance. I take pride in ALWAYS doing my best to provide the best environment for every fish or coral that I bring into my tank. Again, don't make assumptions or come to conclusions too quickly before you have all the facts.

[Aquattro]

I also didn't use it to save money, the GE I wasn't available in black, so I used the II. It cured for a few weeks before I added water, but the tank has been running for a year+ and doing well. Perhaps they have changed the formula since then and it contains the inhibitors mentioned.

[Carrera75]

Originally Posted by Aquattro

I also didn't use it to save money, the GE I wasn't available in black, so I used the II. It cured for a few weeks before I added water, but the tank has been running for a year+ and doing well. Perhaps they have changed the formula since then and it contains the inhibitors mentioned.

Your are right, I was told that the formula changes from time to time. It also seems that some people used it but they let it cure for weeks and that seemed to work well. I would not advise anybody to use this Silicone for reef purposes in the future.

[bkelly]

So do you guys think that a tank /sump that currently is running and has GE ii silicone in it needs to have the silicone removed because of the possibility of it leaching mold inhibitors?
My sump was re siliconed with the GEii ,the tank did crash but is healthy again and SPS are stable in it now (its been a few months) . my Duncan and one acan are still not fully open but all else is doing well.
thanks

[fishytime]

Believe me, I do think about what i post.... More than you know ( for several reasons)...... I'm glad that cost wasn't a factor for you, but fact is, 90% of everyone tries to save here and there.....sometimes it works out and sometimes it doesn't........whether its cost or eastetics, when it comes to DIY, I feel it's best to go with something marketed for aquarium use......