![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() I had the same problem. You have too really read the directions closely
![]() For part two of the test you need a clean vital with new tank water.
__________________
My 265 gallon build! |
#2
|
|||||
|
|||||
![]() Quote:
You must be thinking magnesium. The KH you just add 5mls of water and each drop is .5dkh
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#3
|
|||||
|
|||||
![]() Oh yea, your right. Got them mixed up, It was 4 am when i posted thou
![]()
__________________
My 265 gallon build! |
#4
|
|||||
|
|||||
![]() If it turns orange there are too many drops. You should take the reading when there clearly is no blue left. I find it goes from cyan, to light cyan, to lighter cyan, and then there will be one drop where suddenly it definitely isn't cyan anymore. That's when I take the reading. In my case, I find that is a light urine color.
![]() |
#5
|
|||||
|
|||||
![]() Quote:
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#6
|
||||
|
||||
![]() On My test kit step 4 reads like a misprint. It reads:
Step 4) Each drop of reagent corresponds to one degree of hardness. The total number of the drops used equals the total hardness of the solution in dkh for example 8 drops =4 dkh. To me that says 8 drops = 8dkh Anybody else have this print in their kit? |
#7
|
|||||
|
|||||
![]() Quote:
In my kit each drop of reagent is equal to 0.5 dKH. So 8 drops = 4 dKH. |
#8
|
||||
|
||||
![]() I get a light change in color @ 8 drops but for sure change @ 9 drops. So I've been under the impression that my alk is @ 8.5.
My Ph is @ 8.1, but it could be higher if I'm reading the alk test wrong, however I don't want to push my alk up without knowing if this kit is effed. What are some signs of low Alk?? |
![]() |
Thread Tools | |
Display Modes | |
|
|