![]() |
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
I have been asked to highlight what my dosing is of all elements.
Here is a break down ProdiBio - 1 x Bio digest every two weeks 1 x BioPtim every week 1 x ReefBooster every week (this can be every 2 weeks but I have high sps ratios so like to keep the feeding high) 1 x Iodi+ every week 1 x Stronti+ every week FM balling method including trace B elements. |
|
#2
|
|||||
|
|||||
|
So here is another go with the video camera.
I have tried to capture as best as possible the very large polyp extension I get in using ProdiBio. http://www.youtube.com/watch?v=iyGaiY_jK3o |
|
#3
|
|||||
|
|||||
|
To Coincide with the launch of the Skimz skimmer range by us I thought it would be a good idea to throw one in my sump
OK OK gone a bit over kill here, this is the SM161 rated WAY above my own system, but it fitted in the sumo so why the heck not ![]() So here it is fully assembled and ready to get its feet wet. ![]() The instructions state a water depth of 18cm-24cm, mine is actually at 25cm and there is ample room for adjustment ![]() Starting to dial it in ![]() At this point I must add it has not had a vinegar bath so will take a few days to gunge in. Here is where it is at right now, air flow half open and the water outlet at 50% ![]() Here is a link to the skimmers stats http://skimz.sg/products/protein_ski...age/sm161.html Available from late Jan ![]() |
|
#4
|
||||
|
||||
|
Available late jan?
__________________
My 120G Build Thread |
|
#5
|
|||||
|
|||||
|
well we do have some pre release units.
As always we offer a few demos in return for a full review that both clients and dealers can use to assess the product before investment, its a policy we have always had and it works well for both dealer and client. So drop me an email then we can see if you wish to be part of the Aqua Digital review team. Please only email - sales@aqua-digital.com |
|
#6
|
||||
|
||||
|
I sent you an email!
__________________
My 120G Build Thread |
|
#7
|
|||||
|
|||||
|
As the North American distributorrs of Pacific Sun the time has come to make the switch from Ai to Pacific Sun, it was a natural progression really. The Ai's have served me well but its time to get some PWM control going and play with some XM power.
So my first forray is connecting up the Profilux to the Pacific Sun slave 160w . This runs 3 X-PG LED's at 125 degree natural LED spread, (I will have fun with the XM's when released) with no optics I am not having to play around with heights so much to avoid the spotting effect, it also gives me massive coverage from one single fixture. For now I am leaving the Ai's firmly in place and have adopted cheekly the Ai over tank stand as a test rig for the Black Python. Here are some intial photos. I will talk more about set up tomorrow. ![]() ![]() ![]() |
| Thread Tools | |
| Display Modes | |
|
|