kien's 150g Room Divider Mixed Reef & Stuff

[kien]

Originally Posted by Delphinus

Very nice as usual! Tell me about the flow pattern you have in the FOWLR?

thanks! the flow is identical to what I have going on in the mixed reef. One power head (6105) shoots down the back wall, one shoots down the front wall. The stream hits the opposite wall and bounces back in the middle, above and below the location of the powerheads. I have all powerheads on the controller which pulses them randomly from 75% power to 100% every 10 seconds. Some of the flow that bounces off the opposite wall gets mixed with the flow from the powerheads every once and a while and causes turbulence in various middle parts of the tank. There's also the odd water funnel generated.