|
|
|
|
|
#1
09-22-2010, 10:24 PM
|
|||||
|
|||||
The stand is modeled after ELOS. Simple. Nice that with a rimless you can have the door flush with the front of the tank. So when open the tank hangs off the edge of the stand 3/4". I dislike when doors stick out from the stand and out from under the tank.
All 3/4" (sealed) MDF, nothing else. Glued and screwed. Cost about $40 to make. $20 to spray gloss white. Much cheaper than ELOS (theirs would be even nicer though). 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
