![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() So here I go again, moving the tank. Just a side note, a 12' x 12' room which doubles as your wife's office is not condusive to a 160g fish tank. I'm moving the tank out into the living room area beside the kitchen nook. The living room in sunken down about 1.5' so there is drywall to run pipes through into my unfinished basement. I've braced the floor (for my own piece of mind) and built a sump stand. I've built a new stand since it needs to be lower and have been ordering the parts and plumbing I will need so it's just a matter of finding the time to put everything together.
I'm going with a Reeflo Hammerhead since I'll be running all of my reators ect from it. I also figure I'll have have about 18' of head height plus a few elbows so I went big since it can be dialled down. I'll post a couple pics as I get going. |
#2
|
|||||
|
|||||
![]() wow!....there's a project and a half.....sounds like the makings of a killer set-up!
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
![]() |
Thread Tools | |
Display Modes | |
|
|