DI may be nice but it is not nessasary. you need to take Chloramine out befor it reaches the membrain as chloriene will destroy a membrain pretty fast.
for this reason I have modified my RO to have a progressive prefilter (goes from 25micron to 1 micron) and then TWO chlorine block filters. then my dual membrains and finaly my DI (I don't think I would spend the money on a DI again living out here as the output from my RO is 0ppm befor my DI stage.)
the problem with the west coast is we have a abnormaly high algae content in our water wich will plug up a 1 micron prefilter in no time. also we use chloramine which is harder to remove than chlorine. Carbon will remove it but there is a chance that using only one carbon block filter the dwell time will be to short in higher out put RO's for it all to be removed. This will lead to a premature membrain failure.
My set up is a little extream (320GPD) but I would recomend 50 GPD as a minimum and 100GPD as a recomended starting point. If you get the 50 GPD you can always upgrade the membrain later to a larger one.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.
|
11-12-2003, 05:35 AM
Threaded Mode
