![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Oh yes!!
![]() ![]() |
#2
|
|||||
|
|||||
![]() Ooooooo, sticks falling down is not good at all. Causes further retracted polyp extension.....
![]() |
#3
|
|||||
|
|||||
![]() I have used the Boston Farms epoxy for the last few years and I think it is the best. It is far cheaper than Crazy Glue. I also use the Boston Farms Epoxy Hardener. It fuses the frag immediately. I do not like the sprayer to apply the hardener, I use a pipelet.
Tom R |
#4
|
|||||
|
|||||
![]() Hi Myka,
Have you tried the DD Aquascape epoxy, if so, how does it compare to the Boston Farms epoxy? I have used the DD and have observed that most of the time the rocks or plugs come loose, so I'm hoping that there is something better ![]() I have used the Boston Farms Reef Glue and find it to be very good. Any online vendors selling the BF Epoxy, I checked out J&L but cannot find it; however, I did find a Tunze epoxy, has anyone tried it? Thanks. |
#5
|
|||||
|
|||||
![]() I have tried (in order of preference):
1. Boston Aqua Farms 2. Tunze 3. Bulk Reef Supply The ones that don't even go on the preference list because they suck too much: Tailored Aquatics D-D Deltec. Last edited by Myka; 09-11-2010 at 08:05 PM. |
#6
|
|||||
|
|||||
![]() |
#7
|
|||||
|
|||||
![]() Tom, you're referring to the glue, not the epoxy.
![]() So I hear that "the old" Boston Aqua Farms Epoxy sucked, and this "new" stuff is much better. Not sure how old the new stuff is. ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|