![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() like xtreme said, the FLANGE side. Which, depending how you put the bulkhead in, will be wether it's the wet or dry side.
If you put it on the nut side, the nut will deform and twist it all up, and it won't seal
__________________
Dan Pesonen Umm, a tank or 5 |
#2
|
||||
|
||||
![]() And the water could seep through the threads and out. Thats why you need the flat surface to seal against.
|
#3
|
|||||
|
|||||
![]() Ya, what he said LOL
__________________
Dan Pesonen Umm, a tank or 5 |
#4
|
||||
|
||||
![]() I would still go after the case of beer as the nut is usually on the out side for access. It can be a little diffucult to tighten when its at the bottom of a 2 foot deep overflow.
|
#5
|
|||||
|
|||||
![]() always wet side flange or nut
__________________
but what the heck do i know |
#7
|
|||||
|
|||||
![]() NO
If you put it on the nut, the nut will bunch up the seal and it WILL LEAK. And, if you have the style bulkheads like I used from Wendell on my 150g, the nuts have "teeth" which would totally make a mess of the seal
__________________
Dan Pesonen Umm, a tank or 5 |
#8
|
|||||
|
|||||
![]() Always flange side, wet or dry, but the ideal is on the wet side.
Small tip: I always put a thin layer of silicon around the edges of the hole and only then assemble the bulkhead. After that I put a second layer of silicon around the bulkhead (in side and outside) for extra safety |
#9
|
|||||
|
|||||
![]() One more for flange side regardless of whether it's wet or dry.
__________________
SPS Dedicated 24x24x20 Trimless Tank | 20 g Sump | Bubbble King Mini 160 Protein Skimmer w/ Avast Swabbie | NP Biopellets in TLF Phosban Reactor | ATI Sunpower 6 x 24W T5HO Fixture | EcoTech Vortech MP20 | Modified Tunze Nanostream 6025 | Eheim 1260 Return Pump | GHL Profilux Standalone Doser dosing B-Ionic | Steel Frame Epoxy Coated Stand with Maple Panels embedded with Neodymium Magnets "Mens sana in corpore sano" |
#10
|
||||
|
||||
![]() Quote:
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|