well if you want a PFO type you might be better off going with a sheet of spectral aluminum..
here is a pic of what I can get.. remember it took 3 to make this.. the two on the outside are the same.
http://members.shaw.ca/s.l.s/diy/lig...lides/end.html
last time I looked into it it was 6.50 to 7.00/sq^ft to get it to the island.. a sheet is 4 foot x 10 foot. and you had to order 1 sheet min. I remember some one in cowtown looking into it for about 1/2 the price but we couldent conferm if it was the same stuff.
basicly I can do a 48" reflector for a single or a double floressent for about 20.00ish and the center one is a bit more. (it is good for a couple MH but it is 10" wide) and this is providing I can still get the "Good guy" price.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.
07-03-2003, 12:56 AM
Threaded Mode
