Drain questions

[trouble]

yeah, i think im going to go with glass seems to me i skirt a lot of issues by going that route. really the only reason i was thinking about going with acrylic was because i figured it would be easier to cut the grate/teeth into it around the top. as far as seeing into though i am going to go with tinted or smoked glass i dnt want to see the plumbing behind it. so i will make the overflow out of glass and i've bee thinking of making a lid to fit to keep the light out of the overflow, so i think ill make that out of acrylic and put the teeth into a lip on the underside of the lid. the only thing i am undecided on is wether to have the overflow extend the full depth of the tank or just take up say 6" or so at the top.

[mark]

Couple of things
-your overflow doesn't need notches
-check Reefjunkies build for a Herbie using bulkheads on the side (and chamber doesn't need to go to bottom of display)

[KrazyKuch]

you can always go with a glass overflow and just stop the glass below were you want the notches, then you can silicone a piece of acrylic to the face with the notches in it!!!