![]()  | 
	
| 
		 
			 
			#11  
			
			
			
			
			
		 
		
		
	 | 
|||||
		
		
  | 
|||||
| 
	
	
		
			
			 There is now a little bit more progress on the tank.  I ran into some "minor" problems though, I'll explain in a bit.  I started building the stand today.   
		
	
		
		
		
		
		
		
			Here is the rough plan of what I was going to build: ![]() However, as I started to build the bottom frame, screwing the last long length my robertson #2 drill bit slipped out of the screw and hit my thumb. I thought it was just a cut, then I looked at it, and it had gone through the nail and out the other side. Here's what it looked like (sorry for the fuzzy cell phone camera picture): ![]() I wanted to just bandage it up and continue, but my wife is much wiser than I so she made me go to the medi-centre. Doctor took an x-ray and found a bit of bone damage. I had to have a tetnis shot. Here is an xray shot, you can see a tiny bit of chip on the upper right: Since there was bone damage, I had to get some antibiotics. They look like Halloween candy. 4 times a day on an empty stomach....argh. ![]() Well....after all that, at least there is a bit of progress on the stand. Here's what I have so far. ![]() The good news is that I got all the lumber for my stand for free. I asked one of the builders that I work with if I could look look through their framing garbage pile    Hopefully there will be a bit more progress in the next few days while my thumb heals.  Thanks for looking.Last edited by Dez; 04-03-2009 at 03:37 PM.  | 
| Thread Tools | |
| Display Modes | |
		
  | 
	
		
  |