Any words of warning about re-siliconing?

[Skimmerking]

hey man the silicone is easy to re do just when you take the glass off use the razors and exacto blades to take all the silicone off the glass and the light film too. and then after that use rubbing alcohol to take the crab off it . very important.. other then that its easy as pie. good luck

[traco]

Now are we talking about taking the whole tank apart or just cutting away the silicone lines inside the tank?

[Skimmerking]

well if the seal gave away then yes do what i have stated. If the silicone is jsut being cut away then just take the inner side off and clean it with rubbing alcohol and then re do it with a good bead of silicone .

[e46er]

use tapeto get a nice straight edge and a silicone with no mildew protectant
Rona brand silicone is aquarium safe and only 4 bucks a tube

[Skimmerking]

Originally Posted by e46er

use tapeto get a nice straight edge and a silicone with no mildew protectant
Rona brand silicone is aquarium safe and only 4 bucks a tube

yes good point there that i failed to say. tape the edges about 1/4" tp give that straight tape line

[kodak]

Yes rona brand is cheap but if you cant find it then GE 1 or 2 door and window, 100% rubber silicone w/ no milldew or ant fungal additives.. I've repaired about 100 tanks with great success.. both for either complete rebuilds or re sealing..

[Coldwater]

Thanks for the help. I am going to take the whole tank apart and then start from there. Here is the original post. I still dont trust the thing. The shot is from the back to the front.
http://www.canreef.com/vbulletin/showthread.php?t=39190

Matt