Ghl Profilux Discussion And Support Thread

[Todd]

Originally Posted by Aqua-Digital

Dimmable ballasts will use two ports as they are dual mode and can be dimmed independantly, however you can wire them together.

LED sticks and spots use two ports as they are dual channel.

Tunze use one port each.

Do not mix and match tunze with dimmable always have running on sperate ports i.e dimmable on L1L2 and Tunze on L3L4

if you are out of ports you can use the PLM-4L card.

Thanks for your help quick replys as always! I was having alot of problems getting trying to get it to work. I am disapointed that I cant do this with my current configuration, I'll look into the expansion card.