phosban reactor?

[fiorano]

thx for the help guys i might just buy one for carbon then if it doesnt help with phosphate that much. what is a good phosphate removal media if i decide to still use it for both?

[Hairytank]

I run one two little fishies reactor and use Rowaphos in it. My phosphate always comes up 0 since adding it and helped with some problem algae that I had. I also have a clump of Chaetomorpha in the sump to utilize any "stray" nutrients.

[parkinsn]

This is what my LFS recomeded

http://www.jlaquatics.com/phpstore/s...ID=rw-phos0250

[lobsterboy]

the 2little fish reactor === sweet sweet candy

[JDigital]

Originally Posted by parkinsn

This is what my LFS recomeded

http://www.jlaquatics.com/phpstore/s...ID=rw-phos0250

I use the same stuff.. seems to be working great so far..

[Boomboy]

i personally would get the Bulkreefsupply one, with the dual chambers one for each over the little fishies, but its just preference really. i want to run carbon and phos in my system, and its a good way to do it.

[JDigital]

Originally Posted by Boomboy

i personally would get the Bulkreefsupply one, with the dual chambers one for each over the little fishies, but its just preference really. i want to run carbon and phos in my system, and its a good way to do it.

You get two reactors with the TLF package as well.. You run them in-line with each other off the one pump.

[fiorano]

thanks for all the posts guys i think im going to go pick this up or ... order hahah the shipping is cheaper than the gas

Originally Posted by Boomboy

i personally would get the Bulkreefsupply one, with the dual chambers one for each over the little fishies, but its just preference really. i want to run carbon and phos in my system, and its a good way to do it.

TLF and the Bulkreefsupply both do the same job, but the Bulkreefsupply one is MUCH easier to clean/service - big advantage for a job that needs to be done at least monthly...

[e46er]

i know the thread is 3 weeks old but i just got the TLF reactor with 2 chambers im going to run carbon and opti-phos......... does it matter which one is first in series?