![]() |
|
|
|
#1
|
|||||
|
|||||
|
The last time I tested mag it was at 1350ppm, guess I should check it again.
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
|
#2
|
|||||
|
|||||
|
Just tested, and mag is still at 1350ppm (Salifert) Could the lighting time be too long? Actinics are on for 12hrs, full lighting for 10hrs
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
|
#3
|
|||||
|
|||||
|
Quote:
Tom R |
|
#4
|
|||||
|
|||||
|
Tom has a good point there about t5, they sometimes can bleach corals mine are on for 6 hrs a day atinics for 10hrs, atinics are giesman blue plus x 2 54w.
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |
|
#5
|
|||||
|
|||||
|
Thanks for info. I will try that. It will be hard to move as it has attached to the LR. It is pretty much on the bottom of the tank now. I'll see what I can do
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
|
#6
|
|||||
|
|||||
|
Quote:
If the corals are going to be hard to move then I would try to reduces the photo period for 3 to 4 weeks and then slowly increase it. Keep in mind that even where they come from (Fiji etc) peak sun is only 3 to 4 hours. Not that our lights can reproduce actual sunlight. Tom R |
|
#7
|
|||||
|
|||||
|
lots of people say that IO has screwed up the alk in their tanks, mine has been fine however I am changing soon. I wish I had an answer for you about the monti caps however I don't. IME my tank when it was a mixed reef was great in colour for the caps when I moved to full sps less feeding and ultralith the monti's didn't look as rich in colour.
I tried to link up photos from photobucket but it wont let me.
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |
![]() |
| Thread Tools | |
| Display Modes | |
|
|