No water changes

[fishdaddy3]

Originally Posted by Telford

Is it very important let your water sit for a couple days after mixing it? Do you just manually aerate it or?

I read an article once that said it was important to let newly mixed salt water age for a few days because it is very caustic and corrosive when just mixe and it could be hard on livestock AND equipment.

[digital-audiophile]

I usually let my water sit for 24 hours, just to have a chance to mix really well and bring it up to temperature.

[fkshiu]

Originally Posted by fishdaddy3

I read an article once that said it was important to let newly mixed salt water age for a few days because it is very caustic and corrosive when just mixe and it could be hard on livestock AND equipment.

That's UNdissolved salt and saltcreep that's corrosive. As long as the water is clear it's fine to use. Using a high powered pump helps hasten help dissolving process. I use a DIY modded maxijet which will blast the water out of my 33 gallon Brute garbage can if I'm not careful.

[StirCrazy]

Originally Posted by fishdaddy3

I read an article once that said it was important to let newly mixed salt water age for a few days because it is very caustic and corrosive when just mixe and it could be hard on livestock AND equipment.

I used a mixer paddle on the end of a drill, mixed it up real good the only time I let it sit for more than an hour is when I felt lazy all of a sudden, but having said that overnight would be good. now I used RO water so I wasn't worried about clorine or anything.


Steve

[Aquattro]

I just added 80g to my system, it didn't sit more than an hour per batch. I added 4 20g pails over the course of the day. Every thing is fine.

[kwirky]

Wow I totally missed this thread, it got to like 50 posts in 2 days!

I'd say siphoning out detritus has the effect of changing my water. My 5 gallons or less of siphoning is my small window of opportunity to siphon out as much visible detritus as possible and I've been trying to develop my own way of getting as much as I can with each change.

As for aerating water any changes larger than 5% I aerate if the water's straight out of the RO unit. I do this for 24 hours then use it. If my RO basin has had the current batch of water in it for like a week I just dump in the resulting saltwater right away.

And I test my water going into the aquarium about every 3rd batch or so (or on a new bucket).

One "no-no" i've done is use the well water a couple times out of desperation here on the acreage (since I haul water from the city to use on the aquarium). I have comprehensive test results of the water done by the hospital and it's supposed to be better than city water except it's high in potassium (which doesn't hurt since our salt's low in it). I haven't had problems yet but I haven't really used it much out of fear of something nasty happening. I've only used about 5 gallons in total over the past 3-4 weeks.

[Pan]

The reason I let my water sit is to balance out the alk, ph etc.. sometimes i have to add things to get what i want. It is proably one of those things that can be done either way...some say its fine to add and some say no. Kent says its okay to add, but to wait preferably. I only wait because i usually have to dose something or another. I find it more convenient to do it my way. I don't actually use kent...well i do sometimes i have a bucket laying around...but i have found salt is salt. I'd use reefers best but my calcium reactor cracked and i am too cheap to get a new one, and the calcium is low in reeefers best on purpose.

[Jenndarlin]

I don't know how long you have to be in the hobby to not be a "Newbie" anymore but I still definately consider myself a Newbie. There's so much to know I think i always will be....lol...

I started my system about a year ago but I had been researching the logistics for about 3-4 months before the actual setup. Books; specifically "The contientious marine aquarist" and the Internet were my bibles at first, the staff at OA were later to come but have been invaluable. To me the amount of money that I was going to have to put into the setup alone, let alone then stocking the system was the reason I took the researching aspect so seriously. In everything I read, "Good Skimmers and Weekly Water Changes" was not just mentioned but described in detail. I didn't even know until reading this thread that not doing weekly water changes was an option. I just assumed that if you let it go long enough, everything would die....just another reason i love this site...I always learn something new from every post I read on here. From what I have gathered though from this thread is those who don't do weekly or even bi-weekly water changes and have successful systems are very experienced and have a way better understanding of their water paramaters and what they need to be running/supplementing to ensure those water levels. I think I'll stick with weekly water changes for now.

I started with a Coral life Super Skimmer 60, which was great in the beginning but has been up and down over the last 6 months and the motor seems to have gone, again, on the pump in the past few days but I don't think I can fix it this time. I now know this wasn't the greatest choice for skimmers and I want to look at something that will last more than a year and do a better job than this one did.

I also started with a large rubbermaid garbage bin with a heater, some airstones and a maxijet 1200 for prepping the water for water changes. I've never tested anything other than the salinity and temp before doing my water changes but I just assume my water is really good as when I take my water in, my tests have mostly been really good and if not, they tell me what to do and it goes right back down. I am now curious to know what the change water tests at.

I do 10-15% weekly water changes which seems to be the standard recommendation among books, the internet, staff at the stores I've been to and alot of people on here. That's more than enough for me and with the amount I've invested in it, the stories of the negative effects of not doing water changes is just not worth it.

Questions:

1. What test kits for which tests do people use??
I've been thinking of starting to do my own testing at home. Getting to the store weekly to get my water tested just hasn't been feasible lately and I wouldn't mind getting a better idea of the different tests done. I have a cheap test kit I bought at one the big animal superstores in the beginning but i know it's not accurate. So which brand names or test kits, products does everyone use??

2. Skimmers options. What's a good skimmer for 100 - 150gal????
I have a 100 gallon system including the sump but with rock displacement I figure there's about 60-70 gallons of water in the tank (not sure if this makes a difference or not). I have a plan in the works for a bigger system (150-180gal) that I would like to be able to transfer any new skimmer to. I have heard alot of good things about the Euro Reef Skimmers, I have heard mixed reviews about remora's and I've seen alot of things about DIY...but i definately don't think i'm there yet......lol

I sometimes think I ask too many questions but I wouldn't know most of what i do if i hadn't ask lots of questions

[kwirky]

Originally Posted by Jenndarlin

...
Questions:

1. What test kits for which tests do people use??
I've been thinking of starting to do my own testing at home. ... So which brand names or test kits, products does everyone use??

2. Skimmers options. What's a good skimmer for 100 - 150gal????
... I have a plan in the works for a bigger system (150-180gal) that I would like to be able to transfer any new skimmer to.

I sometimes think I ask too many questions but I wouldn't know most of what i do if i hadn't ask lots of questions

1. I prefer Salifert kits for nitrate, calcium, and magnesium. My Elos kit for KH is just fine (each drop measures 1 dKH) and I sometimes use my Elos pH kit. For ammonia I think my aquarium pharmeceuticals is accurate enough (goes down to 0.25ppm).

2. The euroreefs are very good mid-range skimmers. I'd recommend the RS-180 if you're possibly upgrading tanks later. I wouldn't consider displaced water volume, but rather fish-load on the skimmer. Generally a large tank is stocked with more fish than a little tank no matter how much rock is inside. Larger skimmers can then help with the bioload. But I'm not condoning overstocking your tank either.

[Pan]

Originally Posted by Jenndarlin

I don't know how long you have to be in the hobby to not be a "Newbie" anymore but I still definately consider myself a Newbie. There's so much to know I think i always will be....lol...

I started my system about a year ago but I had been researching the logistics for about 3-4 months before the actual setup. Books; specifically "The contientious marine aquarist" and the Internet were my bibles at first, the staff at OA were later to come but have been invaluable. To me the amount of money that I was going to have to put into the setup alone, let alone then stocking the system was the reason I took the researching aspect so seriously. In everything I read, "Good Skimmers and Weekly Water Changes" was not just mentioned but described in detail. I didn't even know until reading this thread that not doing weekly water changes was an option. I just assumed that if you let it go long enough, everything would die....just another reason i love this site...I always learn something new from every post I read on here. From what I have gathered though from this thread is those who don't do weekly or even bi-weekly water changes and have successful systems are very experienced and have a way better understanding of their water paramaters and what they need to be running/supplementing to ensure those water levels. I think I'll stick with weekly water changes for now.

I started with a Coral life Super Skimmer 60, which was great in the beginning but has been up and down over the last 6 months and the motor seems to have gone, again, on the pump in the past few days but I don't think I can fix it this time. I now know this wasn't the greatest choice for skimmers and I want to look at something that will last more than a year and do a better job than this one did.

I also started with a large rubbermaid garbage bin with a heater, some airstones and a maxijet 1200 for prepping the water for water changes. I've never tested anything other than the salinity and temp before doing my water changes but I just assume my water is really good as when I take my water in, my tests have mostly been really good and if not, they tell me what to do and it goes right back down. I am now curious to know what the change water tests at.

I do 10-15% weekly water changes which seems to be the standard recommendation among books, the internet, staff at the stores I've been to and alot of people on here. That's more than enough for me and with the amount I've invested in it, the stories of the negative effects of not doing water changes is just not worth it.

Questions:

1. What test kits for which tests do people use??
I've been thinking of starting to do my own testing at home. Getting to the store weekly to get my water tested just hasn't been feasible lately and I wouldn't mind getting a better idea of the different tests done. I have a cheap test kit I bought at one the big animal superstores in the beginning but i know it's not accurate. So which brand names or test kits, products does everyone use??

2. Skimmers options. What's a good skimmer for 100 - 150gal????
I have a 100 gallon system including the sump but with rock displacement I figure there's about 60-70 gallons of water in the tank (not sure if this makes a difference or not). I have a plan in the works for a bigger system (150-180gal) that I would like to be able to transfer any new skimmer to. I have heard alot of good things about the Euro Reef Skimmers, I have heard mixed reviews about remora's and I've seen alot of things about DIY...but i definately don't think i'm there yet......lol

I sometimes think I ask too many questions but I wouldn't know most of what i do if i hadn't ask lots of questions

1. Test kits - I use all of the test kits available from elos. (Ph, Calcium, Iodine, KH, NH4, NH3, NO3, NO2, PO4) I also have test kits from Salifert of all of the previous, in addition i have a copper test kit, a dissolved oxygen test kit, ammonia test, silicate, boron and strontium. The last three i did not buy they were given to me as an apology for a messed up online order. I find most test kits okay...the all in one box sets are fine for starting out, but i've found the elos and salifert a little more easy to interpret the results.
2. Skimmers - this get harder because you are treading a fine line between name, build quality, new technology vs old etc. I recently looked into this in more depth as i needed to get a skimmer (ended up getting three, all euro-reefs - Price was right) I like the KZ Skimmers but the price is wrong, as well as the bubblekings, the bubblemasters i liked as well but i found trying to order one and trying to get a hold of ati was ludirously hard so i gave up (was told their cus. serv. was horrible, and it is) A lot of people are recomending octopus skimmers...xtreme something or other. Again it was a hassle to get one so i gave up Mostly what i hear about euroreef is older technology, very wasteful energy wise pumps. That sort of thing. I like mine, i would recomend them. People still buy ASM's same performance as a euro-reef i've heard but cheaper. H&S seems nice, but waaay to pricey for me. Deltecs are always bought as well as the PM Bullets. I can only offer advice on the euro-reefs as the only other skimmers i used are so dated or diy'd it would be no use. I liked the picture at least of the foaminator 5000(?) seemed big...easy to impress people when they come over

I do like my euro-reefs but i think if i did not find them used i would try asm if going new. There are many many opinions on skimmers and no real consesus other than you need one...and even that is questioned by some.

One other aspect to remember with regards to skimmers is if you want an in-sump or external skimmer. OR Hang on back type...with a sump i doubt it unless room is a question. Each in-sump skimmer also requires a certain footprint (room in sump) and a certain water level in the sump to operate at peak effiency. So a Automatic top off or at least diligence in topping off helps. External skimmers are usually built tougher, require feed pumps and are more expensive than in-sumps. One other note...some of the better built/quality etc pumps use clear pvc as opposed to cell cast acrylic or extruded acrylic...i like this idea better, but the ones i wanted were out of my price range.