sump plumbing

[PRAIRIESEA]

I just bought a hang on overflowfrom mike at blue world.It has a 11/2" apox600 gph bulkhead. and i'm getting aquagiant building me a
36"x18"x12" sump about 30g should i stay with 11/2" plumbing or can i to reduce it to 1". and were is a good place in edmonton to buy plumbig parts. by the way i have a 72g bow front with no over folw 2de 150w mh 2 t5 48" 54w blue actinc tubes corallife 220 skimmer.

[jvision]

I usually get my plumbing parts from Home Depot. I've been looking around for a 3/4" check-valve, and have been told to check out Renown Industries.

[untamed]

Originally Posted by PRAIRIESEA

I just bought a hang on overflowfrom mike at blue world.It has a 11/2" apox600 gph bulkhead. and i'm getting aquagiant building me a
36"x18"x12" sump about 30g should i stay with 11/2" plumbing or can i to reduce it to 1". and were is a good place in edmonton to buy plumbig parts. by the way i have a 72g bow front with no over folw 2de 150w mh 2 t5 48" 54w blue actinc tubes corallife 220 skimmer.

Unless you have a very powerful reason to want to downsize to 1", you are going to be better off with 1.5".

[mark]

Not sure what type of standpipe you're planning but bigger is usually quieter.