SPS and flow...need help.

[Skimmerking]

Originally Posted by sphelps

Also your levels are out a bit

Ammonia is too high, should read zero, but likely this is just your test kit
Mg is too low, should be around 1200-1300
Alk is too high should be closer to about 8dkh dropping this will likely lower your pH
Cal is pretty good, but could be higher 440 is what I like

I disagree his Alk is good for not having a Reactor , A reactor is kicking out around 10-11 DKH at a constant rate when dialed in along with that the Calcium running at 400

[Mik_101]

Originally Posted by asmodeus

I disagree his Alk is good for not having a Reactor , A reactor is kicking out around 10-11 DKH at a constant rate when dialed in along with that the Calcium running at 400

I totally agree. My tank is too small for calcium reactor and I don't want calciums levels over 440.

[Mik_101]

Ok I fed my corals and he got quite a bit of color. Thanks for the help though.

[EmilyB]

*edited*

[scsi]

Originally Posted by EmilyB

When is this crap going to stop on here ?

now now.....
Let's keep it civil
I so want this board to not be like alot of the other boards I have to monitor.......

[Mik_101]

Ok thanks scsi.

[EmilyB]

*edited*

Again, please stick to the topic at hand. Verbal attacks on other members will not be tolerated.
Thanks

[Mik_101]

*edited*

Yup we sure do.

Yeah, and with 6 posts you sure have all the info---LMAO.

[scsi]

*edited*

unfair, but true.... an agreement