To all BECKETT SKIMMER owners

[Chin_Lee]

Originally Posted by Delphinus

Sigh ... sounds interesting but I really wish they could be more descriptive than "I sealed it and then drilled holes in it". Or at least have the decency to post a picture of the modification for those that are like me (i.e., only semi-DIY competent) and can't picture what they're talking about without a visual.

Tony, read into the 4 to 6 pages and they have some pics.

Originally Posted by Jason McK

I have heard of this but can never find it. Can you find a link.
Chin, are you going to get a second injector? Were are you going to get it?
J

I need to find that Canadian tire nozzle too... haven't seen it locally

Jason i have some extra beckett heads lying around and some injector assemblies already. I'm looking to decrease the length of my smaller riser and add 11 inch to the main riser. then i might add a second injector if this mod gives better performance at slightly lower psi from a md-70rlt. I'll see.

[Chin_Lee]

OK I'm going to try this mod and here are the before and after pics.
Skimmer specs:
DIY skimmer with 11L x 7.5W x 9H box
Main riser is 17.5" high x 6" OD x 5.5" ID
Secondary riser is 14.5" high x 4" OD and 3.5" ID
Pump - Iwaki 70RLT through one beckett injector

This is the pic of the whole skimmer and the two nails are taped on to the middle of both risers. I had just cleaned the top part last night and this has been running for about 11 hours since the clean.

As previously posted, I'm looking to reduce the smaller riser by 11 inches and increase the big riser by 11 inch. But for this test, they will remain as is for the time being.

Macro shot of bubbles in big riser


Macro shot of bubble in small riser


So my intention is to plug up the hole with silicone and then drill 20 x 1/16 holes into the beckett housing. I will then take photos, then increase the number of holes by 5 at a time and take photos again, until I get what I want to achieve in terms of foam production.

Don't hold your breath for an update soon.... wil probably take me a few days at least.

[littlesilvermax]

Tagging along.

I may try this too, but my bubbles in my beckett look really really small to me.

I would take a pic, but don't have a working camera right now.

Could you take a pic with a penny taped to the side for better comparison purposes?

[Chin_Lee]

Originally Posted by littlesilvermax

Tagging along.

I may try this too, but my bubbles in my beckett look really really small to me.

I would take a pic, but don't have a working camera right now.

Could you take a pic with a penny taped to the side for better comparison purposes?

I'll try to remember tonight... if I can afford it....

[KrazyKuch]

Great Mod Let me know how it works out for you

[kari]

I need to find that Canadian tire nozzle too... haven't seen it locally

I can't find it on-line either. If visiting a Canadian Tire store there may be issues since it is usually in there seasonal stuff. Someone in the store will need to search for it in the storage area .