![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() I was wondering if i should worry about my tank exploding. I just setup a 60 gallon tank 4 feet long by 16 inches deep and 18 high i think. I bought it without a centre brace. The glass in 3/8 thick. It had a black trim around the top that broke off when i moved it. Does this trim offer any stuctural support or is it just cosmetic? Any suggestions about whether i should be concerned. This post kindof gave me the creeps because im in an apartment on the 2nd floor and an exploding 60 gallon tank would make losing a damage deposit the least of my worries.
Thanks Cam
__________________
two false perculas, 50lbs live rock, 65 watt power compacts, 175 watt MH, a sea urchine, a flame angel, a choclate chip sea star, a yellow tailed damsel, a boxer crab, and a conch. |
#2
|
|||||
|
|||||
![]() I took the brace out of mine 3 years ago, sometimes they are there for nothing more than a place to put your light strips. a good way to tell if you don't mind trying it is to take it out and then slowly fill the tank.. every couple inches use a strait edge along the top of the glass and measure the amount of bow. mine only bowed less than 1/64th of an inch when it was full any more than 1/16th and replace it with a glass beace or euro brace.
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
![]() |
Thread Tools | |
Display Modes | |
|
|