![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Awesome! Was it fairly simple/easy? or hard?
What size of holes? |
#2
|
|||||
|
|||||
![]() The hardest part was screwing up my courage. Once I got started it actually went fairly well. I had to drill 8 X 1" holes and 2 X 2" holes. I drilled the holes a little smaller than required and then took a dremel and sanded the rest so I made sure that I got a snug fit. I don't know that I want to do it again but am glad that I did it. I took some pictures that I will try and load into my gallery. They are not much to look at as I still have the protective coating stuff on the tank and am going to leave it on until I finish the plumbing etc.
|
#3
|
|||||
|
|||||
![]() Well I have downloaded some pictures - they are not much but do show all 10 bulkheads installed - Yeah
|
#4
|
|||||
|
|||||
![]() ![]() ![]() ![]() |
#5
|
|||||
|
|||||
![]() I believe in the phrase picture's worth a 1000 words and here's quite a few showing plumbing using the 4 way and other OM products.
http://www.oceansmotions.com/forum/viewforum.php?f=10 |
![]() |
Thread Tools | |
Display Modes | |
|
|