![]() |
|
#1
|
|||||
|
|||||
![]() What? I got the same issue since I started with aquaforest...
Sent from my iPhone using Tapatalk |
#2
|
|||||
|
|||||
![]() Wait for Wheelman76 to chime in. He doesn't get up until later but he had same issues.
__________________
Illuminata 57gallon rimless <-- this is a lie! |
#3
|
|||||
|
|||||
![]() Wish I could give you some of my phosphates as they won't go under 0.25 LOL.
__________________
300g Basement Reef - April 2018 |
#4
|
|||||
|
|||||
![]() I had the same issue after I switched to AF. My nitrates rose from 0 to 30 ppm after a couple of weeks of using Pro Bio S/NP Pro/Zeomix. My nutrients (NO3: 30ppm PO4: 0) sat there for 3 weeks.
I did 25% weekly WC to lower my NO3 level and continue dosing Pro Bio S/NP Pro. I must admit I almost give up after 2 weeks though I didn't noticed anything odd with my corals except that my yellow green monti turned darker green. Until last week my NO3 dropped to 10ppm to undetectable 2 days ago. I noticed that my skimate turned darker and darker and indication that the bacteria now took over. I'm dosing KNO3 now for 2 straight days now and feeding heavily to balance the system. How long have you been using AF? Do you use Zeomix? |
#5
|
||||
|
||||
![]() I have on occasion added PO4 source to bring up the level. I used Flourish Phosphorus with no adverse affect on corals. Little bit goes a long way lol
|
#6
|
|||||
|
|||||
![]() Sound like a similar situation. I am doing water changes now to help with the No3. Don't use the zeolites and been using AF for about a year. I am in recovery mode after a huge STN of all my acros.
Quote:
|
#7
|
|||||
|
|||||
![]() Quote:
I just did another test again today NO3 is 0ppm. In your case, I would continue doing large WC to manage NO3. Im not sure how NOPOX works so I cant comment on that. |
#8
|
|||||
|
|||||
![]() If I may add, be careful with Zeolites. My corals didn't like it when I started using it. I started with 1/4 of the recommended dosage. my corals turned pale close to bleaching after a week of using it.
|
![]() |
Thread Tools | |
Display Modes | |
|
|