upgrading MITRA 6100hv to 6200hv

[Phil]

So a lot of people don't think its worth upgrading there lights, whether its a mitra,sol,radion. heres my opinion on why it is worth it.
1- you sell you lights your gonna loose money
2-the new lights u buy your gonna lose on them too.
3-you upgrade your boards , or pucks you now have spares.


Heres some pictures of my upgrade on my mitra


u take off the end plate

remove glass and this is what youll see.

now u want to remove the little reflectors with the 4 screws

now what u see is 2 pucks 1 is the hyper violet that u don't need to touch the other in the puck u remove by lifting up slightly and pulling towards the case.

this is what your removing

heres the new one

here u can see I have one finished , two pucks replaced and the other three pucks are removed.

now all pucks are replaced

now all the screw and reflectors are replaced
NOTE- reflector only fit on one way.

now all done except for the end plate.

these are all plug and play.
onley thing I did afterwards was upgrade the firmware which needed to be done anyway.

and like I said before well worth the money to upgrade considering the money you would loose selling the fixture then buying a whole new one.