Tank is tripping breaker....

[StirCrazy]

Originally Posted by MarkoD

thanks for the advice but theres no way to run new wiring. i work for telus and i run lots of inside wiring and the only way to run wire to this part of my house (if it were coax or cat5) would be to drill outside and run the cable on the outside.

i think what im gonna do is just rewire the panel and put the room lights onto another circuit.

that isn't realy going to help much.. you are maxed out and if your only getting 8 amps from four 250 watt MH that would be the most efficient lighting I have seen. a more realistic estimate is 10 to 12 amps from your lights alone.. then you have heaters and everything else.

do you have a plug on another circuit you can move two of the lights to? or maybe getting a nice 12 guage extension cord in a color that will blend in witht he surounding to bring the power from an unused outlet to your tank.

although the best way would be a new circuit, I have never seen a house you couldn't put a circuit inside.. its just a question of how much you feel line doing. I know when telus was here when I bought the place they told me I would have to go outside to get what I wanted, so I told them to leave the material and I would run it myself and call them back to hook it up. but I had to cut small holes in drywall, take out narrow strips in some places ect.. then repair it. even if you are not confident in doing that kind of work, you could do the cable/phone installers favorite method, drilling through the wall to the outside (saves them time and work) and then run conduit on the out side of the house or under ground. if you do that way run 12/3 so you can bring two 20 amp outlets to the tank. then you'll be good to go.

Steve