'PicoSurge'

[BlueAbyss]

Well, the baffles will actually be perforated and so shouldn't reduce the flow too much. The idea with the baffles is to spread the flow out and reduce the velocity but not slow down the flow. EDIT: Now that I think about it, reducing the velocity IS reducing the speed of the flow... that's fine as long as it still runs the 300 gph I want.

I'm looking at using a pair of MiniJet 606 pumps, 1 for each surge tank (unless I go with a closed loop, then 1 will feed the closed loop and the other will feed a single surge tank).