SPS and flow...need help.

[Skimmerking]

Originally Posted by sphelps

Also your levels are out a bit

Ammonia is too high, should read zero, but likely this is just your test kit
Mg is too low, should be around 1200-1300
Alk is too high should be closer to about 8dkh dropping this will likely lower your pH
Cal is pretty good, but could be higher 440 is what I like

I disagree his Alk is good for not having a Reactor , A reactor is kicking out around 10-11 DKH at a constant rate when dialed in along with that the Calcium running at 400