Joe Reefer's Inwall 120 V2.0 (Updated)

[Joe Reefer]

The was no real reason for the extra bends on the return side of the pump. I did know how I wanted the supply manifold postioned so this was what drove the pump location. On a side note the pump performs better than I expected and is amazingly quiet.

The upper prop tank drains into the fuge below then out the side of the fuge back to the sump.

I know the glue job looks bad but there was not one leak when I tested the tank with fresh water and to be honest I planned on painting all the plumbing when done, but it probably isn't going to happen now.